The Xplorer is a completely new design from manufacturers NAN Model. The model was pre released to a few of the best F3J pilots in the world and their early results winning both Eurotour contest, and The F3J World Championships proves this model is currently the best you can buy. The Xplorer is available in V or X tail versions, construction is Full Carbon wing with composite fuselage and tails.
The model comes almost completely finished. The tow hook and fuselage servo tray is fitted at the factory, the brass control horns screw directly into the flaps and ailerons so there is no messing about with epoxy and micro balloons. The Quick change Ballast system is pre installed and takes a few seconds to change the weight by removing just one bolt. All hardware is included, and a full Ballast kit of 3 possible weights is available under our accessories page. You just require your R/C equipment to complete it.
Wing Span 3500mm
Fuselage Length 1630mm
Wing Area 75.85 dm2
Wing Profile NAN F3J
Tail Area 7.3 dm2
Flying Weight 2000-2150g
Requires 6 Servos (Ailerons, Flaps, Elevator, Rudder)
Graupner DS3228
Graupner DS361
Graupner DS368
Graupner DS3068
Futaba S3150
Pre release wins so far for the Xplorer.
F3J World Championships 2008 - Benedikt Feigl - Xplorer V Tail
F3J European Championships 2009 - Primoz Rizner
Istanbul Soarist Cup 2008 - Primoz Rizner - Xplorer X Tail
Bulgaria Cup Eurotour 2008 - Primoz Rizner - Xplorer X Tail
Croatia 2008 - Arijan Hucaljuk - Xplorer
Podhorany F3J Eurotour 2008 - Sebastian Feigl - Xplorer V Tail
German F3J Championship 2008 - Sebastian Feigl - Xplorer V Tail
German Junior F3J Championship 2008 - Benedikt Feigl - Xplorer V Tail
(Based on 1 Reviews)
Reviews / Comments
"See the full review here http://www.acemodel.co.uk/xplorer-x-tail-review/info_51.html
"
Nov 08 2008, 23:45 PMby Austin
»F3J»Xplorer 3500 V
Your basket is empty.
