Servo Mounts (x2) SD150, Robbe FS-40, Dymond D60, Hyperion DS 09(with mod) - Accessories - Acemodel.co.uk - F3J - F5J - F5B - F3F - Electric models - Slope models

News! | Pre Owned | Contact Us

Shop by Category

Graupner Agent

Reviews

Forums

BARCS Forum

Currency

Mailing List

Subscribe to our mailing list below:

Documents

Servo Mounts (x2) SD150, Robbe FS-40, Dymond D60, Hyperion DS 09(with mod)

Location:

»Accessories»Servo Mounts (x2) SD150, Robbe FS-40, Dymond D60, Hyperion DS 09(with mod)

Share |

Product Information

These excellent mounts enable you to install your wing servos quickly and easily. By removing just a couple of screws the servos are easily removed if you need to replace broken gears or a fualy servo. Mounting is simple, they are glued directly to the suface of the inner wing with an epoxy/microballoons mix. They fit the servos exactly with no play or movement. Manufactured in Germany to the highest quality. Available for a variety of different servos.

Pack contains 2 mounts
Outer dimensions: 42 x 32 x 9 mm or 1.71 x 1.3 x 0.37 Inch
weight: ca. 2 grams
To fit the following servos
Hyperion DS O9 (with modification)
Ripmax SD150
Robbe FS40
Dymond D60

Reviews / Comments

Comment: DS 09 Modification

"The modification to the servo mount requires the cross bars between the screw mounting areas to be removed. Wrap the servo in cling film, screw the servo into the mount using the special blocks, supplied with the servos and epoxy the unit in place. Job done."

Oct 26 2011, 16:00 PMby Andrew Lewis