Control functions: 16
Temperature range: -15 ... 55 °C
Antenna length: 110 mm
Total weight: 1685 g
Frequency: 2400 ... 2483.5MHz
Range approx: 4000 m
Dimensions approx: 252 x 252 x 60mm
Modulation: FHSS
Current consumption: 750mA
Operating voltage: 3.2 ... 4.8V

• Over 200 systems can be used simultaneously
• In the HoTT version bi-directional communication between transmitter and receiver and fastest transfer rates of 10ms for extreme reactions.
• Additional features of the HoTT mc-32:
• Super fast response time by using the main processor for fast data transfer
• Micro-SD card for storing data telemetry and for other functions
• Future with the update capability via USB interface
• The supplied lithium ion battery has a capacity of 6000 mAh, allowing extremely long flight times and reducing the loading procedures.
• Wireless teacher-student system or optionally via cable to the DSC socket
• Selectable by software modulation. This will turn around by pressing a key example of Weatronic (EXT PPM) on HoTT.
• Connections for Weatronic module.
• iFS and Weatronic retrofitted.
• 5 different languages ​​(English, German, French, Italian and Spanish later) is possible via software update. Availability of appropriate language, see the download area.
• 80 model memory and more storage options on the Add feature map
• 8 switches / buttons, including 2 three-position switch, 3 2-stage switch, 2 buttons long, 2 safety switches already installed
• Swashplate limiting: This feature limits the tilt angle of the swash plate and prevents the Heli-3D application that offers the complete deflection of the aileron and elevator mechanics strikes
• Digital trims with an endless wheel, flight phase-specific or global effect
• Zeroing the Digital Trims by simply pressing the endless wheel
• Auto-Trim function. The current stick positions are stored when trimming surface or Helimodellen to touch the trim memory. (Model "balance", press release and billet switches. The correction is on reduction of the stick "soft" appears.)
• K1-switching brake / electric motor: The enlargement of the flight phase programming makes this change to be made very easily. The pilot decides at what stick position (front / rear) off the engine or the brake flaps are retracted.
• Maximum of 16 proportional control functions
• Simplified assignment of control elements such as sticks, external switches, proportional controls and trim levers as control functions
• The future of security is provided by einupdatebares fast 32-bit operating system with a modern Flash memory.
• Blue backlit MULTI-DATA GRAPHIC LCD monitor with significantly improved legibility in low light conditions
• CONVENIENT MODE SELECTOR for easy switching between stick modes 1 - 4 (eg throttle left / throttle right)
• 12 mixers, freely programmable for maximum surface area for model helicopters, with freely selectable input and output functions, four curve mixers exploiting a new eight-point curve technology, easy to set and turn values. 8 points for throttle, collective pitch, tail rotor and other non-linear ways. The computer calculates the CPU with an ingenious polynomial approximation ideally rounded MPC (multi-point curve) mixer curve
• Move the mixer curve points are possible with the rotary encoder in both axes
• 8 flight phase programs can be customized for each model and name, the switching time is programmed separately.
• SUPER SERVO menu provides a sophisticated overview of all servo adjustment and correction for 4 simple parameters (direction of rotation, center position, separately for each side separately for each side and servo travel limit for 16 servos with a total of 96 settings)
• SUPER DUAL-RATE, EXPO and EXPO-/DUAL-RATE-Menü with 36-set-up variants, for three servo functions and 8 phases of flight
• Practice optimized multi-function menus for fixed-wing and helicopter models. Entering the number of aileron and flap servos automatically programs all of the appropriate mixer functions in the multi-function wing menu. Differential aileron mixer, butterfly mixer, dual-flap mixer, automatic gyro set function and other special functions
• Helicopter swashplate mixer for 1 -, 2 -, 3 - or 4-point linkage.
• Selectable cycle time 10 ms, 20 ms, 30 ms or 40 ms depending on the receiver and mode
• Convenient Clock Menu 8 stopwatches system, alarm timer, countdown timer, lap counter etc. 2 and 1 lap time displayed simultaneously and a large area.
• Stopwatch with History: In addition to the lap counter, there is a one time, which captures the turn-on and one time 2, which records the ON and OFF times separately

• GRAUPNER usual menu or program guide
• Transmitter operating timer
• Switch assignment of flight phase switches: 6 switches, 2 with priority feature. The name of each switch combination can be chosen freely. Thus, the number of flight stages on the number of flight phase switches.
• Normal tail type, V-tail, Delta / Nurfl., 2 HR Sv 3 +8 (so are immediately two elevator servos linked to each other without the use of free mixers / Cross mixers available)
• Number of valves 4 AIL / 4 FL: Full support for 8 wing servos, even without the use of free mixers
• Switchable flight phase-shift-delay: For individual channels, flight phase, the delay time can be switched off (for example, enable for Engine Off at electric models, or lock / disable Heli) 10 additional user-definable phase names: In addition to the specified flight phase names by the user 10 own phase names are given free
• Expanded transmitter control menu: option on the input side center adjustment. K1-encoder + trim can be assigned as a donor. An input can be assigned to 2 switches for true 3-stage function
• Wing mixers: Newly designed multi-flap for easy menu settings of up to 8 servos flugphase specific area in an orderly manner without the use of free mixers
• Section entitled "info" in the Setup menu model: Here for each model can have any additional information to be entered. This additional information will appear in the redesigned model selection
• "Logical switch": This feature allows you to link two switches "and" or "or" logical. The result can be used as a virtual switch. Example: Certain functions should be activated only in relation to others (such as wheel brake can be activated only when the undercarriage is retracted). Several functions that are normally switched independently, should if necessary be brought by a "panic button" in its basic position. The automatic program can be activated by several switches that simultaneously select the program
• Extended setting servo center adjustment to ± 125% extended
• Number of flight phases: (area: 8, helicopter: 7 + AR)
• Warning threshold "Throttle too high" in the helicopter menu, programmable power
• Time frame can be RUN + STOP stopped simultaneously and thus deleted.
• Phase trim for surface models for all possible axes
• Hotkey for servo display: A touch of the keys <and> of the left touch-CAP performs almost all menus directly into the power display.
• Swapping the power allocation at receiver output
• CAP-Touch control panel with key lock function prevents accidental operation
• CAP-TOUCH display change from the main menu in the main menu with ESC telemetry
• Many telemetry display, programming and analysis functions directly in the transmitter display
• Model type icon: graphic display of model type (wing / helicopter)
• Onboard connector for PC-USB interface, headphones, SMART-BOX Weatronic module, DSC System, prepared for teacher-pupil operating
• Teacher / student system with or without cable with total transfer, all settings on the master transmitter.
• Additional functions via software update is planned. Subject to change!

• Write review / comment