Pushrod Ends

£6.49
PR-E
In stock
 
Estimate shipping cost

Pushrod Ends

Pack of 4 pushrod ends made specially to fit the pre installed steel snakes on the Xplorer, Xplorer 2, Orion, Omega and the Alex range. The steel fuselage pushrod fits into the centre of the brass end and is held in place by tightening down the steel screw onto the pushrod inner.

It make for quick installation of servos and takes away the need to solder on a clevice or threaded coupler. For added security you can use a small amount of epoxy in the hole before screwing down. After fixing you can cut the head from the screw resulting in a neat and permanent fixing.

Pack contains 4 brass pushrod ends and micro screws (clevises not included)

There are no building tips for this model. If you have any please share them by writing a review.

No video available for this product

Estimate Shipping Cost

Small items are shipped using Royal Mail and larger items including models are shipped by Parcelforce Worldwide and in some cases UPS or TNT.